Buck & Knobby Equipment Co
YourGrasshopper MowersDealer

333G5 EFI Fuel-Efficient Zero-Turn Lawn Mower

featured-image-product-info
<no value>
<no value>
<no value>
<no value>

333G5 EFI Fuel-Efficient Zero-Turn Lawn Mower

Offering unparalleled performance and fuel economy, the Model 333G5 EFI features a closed-loop Electronic Fuel Injection (EFI) engine that continually adjusts the fuel ratio to use less fuel, provide reliable hot and cold starts, reduce emissions and minimize fuel-induced service issues.

Videos

Videos
Options
OPTIONS
WIDE SEAT CONVERSION KIT

Provides additional seating room for larger operators or to accommodate cell phones or pagers. Requires seat belt extension.

EXTENDED STEERING LEVERS

Provides an additional two inches of leg clearance

SIDE DISCHARGE CONTROL KIT

Control the discharge of the mower deck to avoid putting clippings in flower beds and on sidewalks

DURAFLEX® SUSPENSION FORKS

Optional DuraFlex™ Suspension Forks absorb the impacts of rough terrain to maintain a level cut, and can be set for use with PowerVac™ collectors.

BAR-TREAD LOW-PRESSURE TIRES

Optional low-pressure, high-flotation bar-tread tires are available for 61-inch and larger models that flex with the terrain for maximum traction and minimize scuffing caused by wheel spin-out.

Optional 24x12.00x12 turf-tread drive tire for MidMount™ models equipped with 61- or 72-inch decks, performs like a pneumatic tire but without the inconvenience and downtime associated with flat tires. Provides consistent hub height to ensure the mower deck produces an even cut and excellent lateral stability and outstanding operator comfort. Not for use with PowerVac Collection Systems.
Michelin® X® Tweel® Airless Front Caster Tire

Smooth tread, 13x6.50x6 caster wheel. Performs like a pneumatic tire, but without the inconvenience and downtime associated with flats. Not for use with PowerVac Collection Systems, or with DuraFlex Suspension Forks.

FOLDABLE ROPS

The Foldable ROPS allows the two-post ROPS to be lowered for mowing under low-hanging trees and other overhead obstacles, or for storing and transporting in enclosed trailers with low door clearance. CAUTION: Avoid drop-offs, embankments and steep slopes. Do not allow ROPS to provide a false pretense of security in hazardous areas and avoid questionable conditions. Always wear seatbelt when Foldable ROPS is in up-right position. When Foldable ROPS is down, DO NOT use seat belt, and drive with extra caution.

SUNSHADE CANOPY VINYL

Lightweight, water repellent, UV-resistant vinyl canopy mounts easily to OPS or ROPS to limit exposure to direct sunlight, reducing eye strain and increasing operator comfort.

SUNSHADE CANOPY ALUMINUM

Diamond-plated aluminum canopy is highly resistant to abrasions. Easily mounts to ROPS or OPS to increase operator comfort by limiting exposure to direct sunlight and reducing eye strain. Canopy tilts up and down for customized comfort. (Optional fan and light kits increase comfort and roadside visibility.)

YELLOW BEACON LIGHT

Yellow beacon attaches to OPS or ROPS to provide greater visibility in high-traffic areas.

DOWN DISCHARGE™ MULCHING PACKAGE

The optional Down Discharge™ mulching package with GrassMax™ medium-lift blades cuts and recuts clippings and directs them deep into the grass bed, enriching turf and producing a beautifully manicured cut.

SPEEDTRIMMING™ ROLLER KIT

The optional SpeedTrimming™ heavy-duty, anti-scalp roller kit for 61-inch and larger DuraMax® decks speeds close trimming near buildings, fences retaining walls and other landscaping features. Kits available for both left and right sides of cutting decks.

Specifications
Specifications
Engine
Engine Type
72" 333G5
Kohler Command Pro, Delphi®-based closed-loop Electronic Fuel Injection(EFI)/V-Twin
61" 333G5
Kohler Command Pro, Delphi®-based closed-loop Electronic Fuel Injection(EFI)/V-Twin
Displacement
72" 333G5
50.3 cu. in. (824 cc)
61" 333G5
50.3 cu. in. (824 cc)
Lubrication
72" 333G5
Pressure Lube/Filter
61" 333G5
Pressure Lube/Filter
Crankshaft
72" 333G5
Vertical
61" 333G5
Vertical
Engine Cooling
72" 333G5
Air
61" 333G5
Air
Fuel Type
72" 333G5
Gasoline - unleaded
61" 333G5
Gasoline - unleaded
Fuel Capacity
72" 333G5
13 U.S. Gal. (49.2 l)
61" 333G5
13 U.S. Gal. (49.2 l)
Optional Fuel Capacity
72" 333G5
NA
61" 333G5
NA
Air Cleaner
72" 333G5
Heavy-duty, remote mounted, cyclonic, dual element with replaceable element.
61" 333G5
Heavy-duty, remote mounted, cyclonic, dual element with replaceable element.
Muffler
72" 333G5
Ultra quiet, single, industrial type.
61" 333G5
Ultra quiet, single, industrial type.
DuraMax Decks
DuraMax® Deck
72" 333G5
DuraMax®
61" 333G5
DuraMax®
Mulch Kit #
72" 333G5
504571
61" 333G5
504569
Deck Size
72" 333G5
72"
61" 333G5
61"
Cutting Height Range
72" 333G5
1.0 to 5.0 in. (2.5cm to 12.7 cm)
61" 333G5
1.0 to 5.0 in. (2.5cm to 12.7 cm)
Deck Construction
72" 333G5
Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick - more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck.
61" 333G5
Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick - more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck.
Deck Blades
72" 333G5
(3) 25 in. (63.5 cm)
61" 333G5
(3) 21 in. (53.3 cm)
Deck Spindles
72" 333G5
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
61" 333G5
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle Housing
72" 333G5
8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck.
61" 333G5
8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck.
Blade Drive
72" 333G5
Belt drive with single Kevlar V-belt and idler arm tensioning.
61" 333G5
Belt drive with single Kevlar V-belt and idler arm tensioning.
Deck Trimability
72" 333G5
NA
61" 333G5
NA
Starter & Electrical System
Battery
72" 333G5
12 Volt
61" 333G5
12 Volt
Starter
72" 333G5
Solenoid shift
61" 333G5
Solenoid shift
Ignition
72" 333G5
Breakerless
61" 333G5
Breakerless
Interlock System
72" 333G5
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
61" 333G5
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
Operator Seat
72" 333G5
Premier Suspension Seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 – 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.
61" 333G5
Premier Suspension Seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 – 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.
Suspension
72" 333G5
InFrame™ suspension with iso-mounted seat and footrest
61" 333G5
InFrame™ suspension with iso-mounted seat and footrest
Console-mounted Instruments
72" 333G5
Low engine oil pressure, engine code light and parking brake warning light, combination electronic fuel gauge/hour meter, ignition and push/pull PTO switches.
61" 333G5
Low engine oil pressure, engine code light and parking brake warning light, combination electronic fuel gauge/hour meter, ignition and push/pull PTO switches.
Work Lights
72" 333G5
LED
61" 333G5
LED
Hour Meter/Fuel Gauge
72" 333G5
Standard
61" 333G5
- -
Hour Meter
72" 333G5
- -
61" 333G5
Standard
Transmission & Steering
Transmission Type
72" 333G5
The G5 Hydro-Gear ZT-5400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals, reducing costs and maintenance time.
61" 333G5
The G5 Hydro-Gear ZT-5400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals, reducing costs and maintenance time.
Transmission Filtration
72" 333G5
Self-contained fluid and internal filtration. CoolTemp Hydro-Max fluid withstands high and low temperature extremes for extended service intervals.
61" 333G5
Self-contained fluid and internal filtration. CoolTemp Hydro-Max fluid withstands high and low temperature extremes for extended service intervals.
Speeds
72" 333G5
0 - 11.0 mph (0 - 17.7 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
61" 333G5
0 - 11.0 mph (0 - 17.7 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
Turning Radius
72" 333G5
True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
61" 333G5
True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
Steering
72" 333G5
One- or two-hand operation with adjustable QuikAjust Tilt™ dual levers that automatically return to neutral from either forward or reverse position.
61" 333G5
One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
Brakes
72" 333G5
Dynamic braking through hydrostatic transmission.
61" 333G5
Dynamic braking through hydrostatic transmission.
Parking Brake
72" 333G5
Internal disc brake in transmission
61" 333G5
Internal disc brake in transmission
Attachment Drive
72" 333G5
NA
61" 333G5
NA
Tire Sizes
Standard Midmount Drivetire
72" 333G5
26x12.00x12 turf, 6-ply rated
61" 333G5
26x12.00x12 turf, 6-ply rated
Optional MidMount™Drive Tires
72" 333G5
24x12.00x12 bar tread, 4-ply rated
61" 333G5
24x12.00x12 bar tread, 4-ply rated
MidMount™ Front Caster Wheels
72" 333G5
13x6.50x6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap.
61" 333G5
13x6.50x6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap.
Standard FrontMount™ Drive Tire
72" 333G5
NA
61" 333G5
NA
Optional FrontMount™ Drive Tire
72" 333G5
NA
61" 333G5
NA
FrontMount™ Single Frok Tail Wheel Size
72" 333G5
NA
61" 333G5
NA
FrontMount™ Wide Stance Single Fork Tail Wheel Size
72" 333G5
NA
61" 333G5
NA
FrontMount Deck Tire
72" 333G5
61" 333G5
Dimensions
Height, Seatback
72" 333G5
49.0 in. (124.5 cm)
61" 333G5
49.0 in. (124.5 cm)
Height Seat Cushion
72" 333G5
35.0 in. (88.9 cm)
61" 333G5
35.0 in. (88.9 cm)
Height ROPS
72" 333G5
72.0 in. (182.9 cm)
61" 333G5
72.0 in. (182.9 cm)
Mower+Deck Length
72" 333G5
89.0 in. (226.9 cm)
61" 333G5
85.0 in. (215.9 cm)
Mower+Deck - Deck Folded
72" 333G5
61" 333G5
Deck Width - Side Discharge
72" 333G5
85.5 in. (217.2 cm)
61" 333G5
74.5 in. (189.2 cm)
Deck Width - Side Discharge 41"
72" 333G5
NA
61" 333G5
NA
Deck Width - Side Discharge 42"
72" 333G5
NA
61" 333G5
NA
Deck Width - Side Discharge 48"
72" 333G5
NA
61" 333G5
NA
Deck Width - Side Discharge 52"
72" 333G5
NA
61" 333G5
NA
Deck Width - Side Discharge 61"
72" 333G5
74.5 in. (189.2 cm)
61" 333G5
74.5 in. (189.2 cm)
Deck Width - Side Discharge 72"
72" 333G5
85.5 in. (217.2 cm)
61" 333G5
85.5 in. (217.2 cm)
Deck Width - Mulching
72" 333G5
73.5 in.* (186.7 cm)
61" 333G5
62.5 in.* (158.8 cm)
FrontMount™ Width
72" 333G5
NA
61" 333G5
NA
FrontMount™ Wheelbase
72" 333G5
NA
61" 333G5
NA
Weight
Weight Power Unit+Deck (uncrated)
72" 333G5
1330 lbs. (603.3 kg)
61" 333G5
1250 lbs. (567.0 kg)
Weight FrontMount™ Power Unit only
72" 333G5
NA
61" 333G5
NA
Weight Mower Deck
72" 333G5
61" 333G5
Weight Mulch Kit
72" 333G5
44 lbs. (20.0 kg)
61" 333G5
36 lbs. (16.3 kg)
Engine
72" 333G5
61" 333G5
Engine Type
Kohler Command Pro, Delphi®-based closed-loop Electronic Fuel Injection(EFI)/V-Twin
Kohler Command Pro, Delphi®-based closed-loop Electronic Fuel Injection(EFI)/V-Twin
Displacement
50.3 cu. in. (824 cc)
50.3 cu. in. (824 cc)
Lubrication
Pressure Lube/Filter
Pressure Lube/Filter
Crankshaft
Vertical
Vertical
Engine Cooling
Air
Air
Fuel Type
Gasoline - unleaded
Gasoline - unleaded
Fuel Capacity
13 U.S. Gal. (49.2 l)
13 U.S. Gal. (49.2 l)
Optional Fuel Capacity
NA
NA
Air Cleaner
Heavy-duty, remote mounted, cyclonic, dual element with replaceable element.
Heavy-duty, remote mounted, cyclonic, dual element with replaceable element.
Muffler
Ultra quiet, single, industrial type.
Ultra quiet, single, industrial type.
DuraMax Decks
72" 333G5
61" 333G5
DuraMax® Deck
DuraMax®
DuraMax®
Mulch Kit #
504571
504569
Deck Size
72"
61"
Cutting Height Range
1.0 to 5.0 in. (2.5cm to 12.7 cm)
1.0 to 5.0 in. (2.5cm to 12.7 cm)
Deck Construction
Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick - more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck.
Double-layered 10-gauge plus 7-gauge formed-steel laminated spindle plane 0.313 in (7.95 mm) thick - more than 25% thicker than 0.25 in. (6.35 mm) with 7-gauge skirts for geometric strength. Spindle plane is 0.9 in.(22.86 mm) thick in stress zones. Anvil-edge design with 0.5 in. (12.7 mm) reinforcement on front edge of deck.
Deck Blades
(3) 25 in. (63.5 cm)
(3) 21 in. (53.3 cm)
Deck Spindles
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Double bearings greasable from top of deck. Spindle head designed to eliminate fiber wrap. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Spindle Housing
8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck.
8 in. (20.3 cm)-diameter housing. Machined aluminum housing on 52- and 61-inch deck. Cast iron on 72-inch deck.
Blade Drive
Belt drive with single Kevlar V-belt and idler arm tensioning.
Belt drive with single Kevlar V-belt and idler arm tensioning.
Deck Trimability
NA
NA
Starter & Electrical System
72" 333G5
61" 333G5
Battery
12 Volt
12 Volt
Starter
Solenoid shift
Solenoid shift
Ignition
Breakerless
Breakerless
Interlock System
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
Ultimate Operator Station
72" 333G5
61" 333G5
Operator Seat
Premier Suspension Seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 – 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.
Premier Suspension Seat provides the ultimate in operator comfort. Low-profile seat slides fore and aft and includes an integrated shock absorber that manually adjusts to operators between 100 – 300 lbs. Other ergonomic features include a backrest that tilts from -5 degrees to +30 degrees, a lumbar support mechanism, adjustable armrests and a retractable seat belt.
Suspension
InFrame™ suspension with iso-mounted seat and footrest
InFrame™ suspension with iso-mounted seat and footrest
Console-mounted Instruments
Low engine oil pressure, engine code light and parking brake warning light, combination electronic fuel gauge/hour meter, ignition and push/pull PTO switches.
Low engine oil pressure, engine code light and parking brake warning light, combination electronic fuel gauge/hour meter, ignition and push/pull PTO switches.
Work Lights
LED
LED
Hour Meter/Fuel Gauge
Standard
- -
Hour Meter
- -
Standard
Transmission & Steering
72" 333G5
61" 333G5
Transmission Type
The G5 Hydro-Gear ZT-5400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals, reducing costs and maintenance time.
The G5 Hydro-Gear ZT-5400 transmissions are designed to provide powerful, smooth response The heavy-duty, self-contained commercial transaxles are integrated with a cooling fan and feature 1-3/8-inch axles for longer service life. You’ll also enjoy best-in-class transmission fluid change intervals, reducing costs and maintenance time.
Transmission Filtration
Self-contained fluid and internal filtration. CoolTemp Hydro-Max fluid withstands high and low temperature extremes for extended service intervals.
Self-contained fluid and internal filtration. CoolTemp Hydro-Max fluid withstands high and low temperature extremes for extended service intervals.
Speeds
0 - 11.0 mph (0 - 17.7 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
0 - 11.0 mph (0 - 17.7 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
Turning Radius
True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
Steering
One- or two-hand operation with adjustable QuikAjust Tilt™ dual levers that automatically return to neutral from either forward or reverse position.
One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
Brakes
Dynamic braking through hydrostatic transmission.
Dynamic braking through hydrostatic transmission.
Parking Brake
Internal disc brake in transmission
Internal disc brake in transmission
Attachment Drive
NA
NA
Tire Sizes
72" 333G5
61" 333G5
Standard Midmount Drivetire
26x12.00x12 turf, 6-ply rated
26x12.00x12 turf, 6-ply rated
Optional MidMount™Drive Tires
24x12.00x12 bar tread, 4-ply rated
24x12.00x12 bar tread, 4-ply rated
MidMount™ Front Caster Wheels
13x6.50x6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap.
13x6.50x6; rib tread, pneumatic with greasable, double-sealed bearings to protect from grass wrap.
Standard FrontMount™ Drive Tire
NA
NA
Optional FrontMount™ Drive Tire
NA
NA
FrontMount™ Single Frok Tail Wheel Size
NA
NA
FrontMount™ Wide Stance Single Fork Tail Wheel Size
NA
NA
FrontMount Deck Tire
Dimensions
72" 333G5
61" 333G5
Height, Seatback
49.0 in. (124.5 cm)
49.0 in. (124.5 cm)
Height Seat Cushion
35.0 in. (88.9 cm)
35.0 in. (88.9 cm)
Height ROPS
72.0 in. (182.9 cm)
72.0 in. (182.9 cm)
Mower+Deck Length
89.0 in. (226.9 cm)
85.0 in. (215.9 cm)
Mower+Deck - Deck Folded
Deck Width - Side Discharge
85.5 in. (217.2 cm)
74.5 in. (189.2 cm)
Deck Width - Side Discharge 41"
NA
NA
Deck Width - Side Discharge 42"
NA
NA
Deck Width - Side Discharge 48"
NA
NA
Deck Width - Side Discharge 52"
NA
NA
Deck Width - Side Discharge 61"
74.5 in. (189.2 cm)
74.5 in. (189.2 cm)
Deck Width - Side Discharge 72"
85.5 in. (217.2 cm)
85.5 in. (217.2 cm)
Deck Width - Mulching
73.5 in.* (186.7 cm)
62.5 in.* (158.8 cm)
FrontMount™ Width
NA
NA
FrontMount™ Wheelbase
NA
NA
Weight
72" 333G5
61" 333G5
Weight Power Unit+Deck (uncrated)
1330 lbs. (603.3 kg)
1250 lbs. (567.0 kg)
Weight FrontMount™ Power Unit only
NA
NA
Weight Mower Deck
Weight Mulch Kit
44 lbs. (20.0 kg)
36 lbs. (16.3 kg)

Request a Quote or a Demo!

Let us help you find Your Next Mower.

Fill out the form and we'll be in touch soon.

Thanks!

We will contact you shortly.

Oops! Something went wrong.

An error occured while submitting the form. Try again later.

This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
Getting a Quote
A Personal Demonstration
Receiving a Call
This field is required.
This field is required.
61" 333G5
72" 333G5
This field is required.
This field is required.
Sent!

Buck & Knobby Equipment Co

featured-content-map
6222 Sterns Rd
Ottawa Lake, MI 49267
Hours
Monday
7:00 AM - 5:00 PM
Tuesday
7:00 AM - 5:00 PM
Wednesday
7:00 AM - 5:00 PM
Thursday
7:00 AM - 5:00 PM
Friday
7:00 AM - 5:00 PM

Our Store

Buck & Knobby Equipment Co is your authorized Grasshopper dealer selling and servicing the complete line of Grasshopper MidMount™ and FrontMount™ mowers for turf care professionals, business and government entities, and homeowners. Read More

STORE NEWS

Grasshopper mowers can be customized to fit your specific mowing needs. There are choices of gasoline or diesel, MidMount™ or FrontMount™ models available in cutting widths from 41 to 72 inches. FrontMount™ models can be put to work year-round with attachments for snow removal, turf renovation and debris management. Come in and learn why Grasshopper is the best investment you’ll ever make in a mower.
Contact Us
Locations
Hours
Schedule
Custom Name Custom Name